Tel: 0086-371-60317344
Bonnie@gsl-machine.com

best sale waste tyre recycling machine

best sale waste tyre recycling machine
Categorieswaste tyre recycling machine
AlbumView larger image
BrandGashili
ModelGLKP-400
Applicationwaste tire powder machine
QualityChina standard
Guarantee1 year(wearing parts exclude)
Production time30 working days
Packingseaworthy packing
FOB portQingdao, Shanghai, or as required
Terms of PaymentL/C, T/T, Western Union
Update Time2018-11-19
Detail Information
Waste tyre recycling machine, rubber powder production line

waste tyre shreddering and recycling machine is mainly used for crushing waste tires into rubber powder for reuse.

The Process flow:

Waste tyre—ring cutter –strip cutter –dice cutter—crushing--- filtering--magnetic screening—rubber powder

Processing method:

Physic mechanical crushing method at normal temperature of waste tyre:nochemical raw material is required,no waste gas,washte water and soot are discharged, and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes),take waste tyre as example,the process is as follows:breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced.

1. Tyre ring cutter
This machine is mainly to cut the inner diamater of the tyre, and cut the side of the tyre to the next step of segmentation.

Model

Motor power

Working range

Working quatity

Size of figure

weight of equipment

GLQQ-1

2.2kw

750-1200tyre

25-30strips/h

1150*850*1200

0.5ton

2. Tyre strips cutting machine
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.

Model

Motor power

Working range

Working diamater

Size

of discharge

Size

of equipment

Weight

of equipment

GLQT-1

5.5kw

10strips/h

Less 1200

35-55

1230*650*1580

0.8ton

4. Tyre block cutting machine
Cutting machine can cut a tire strip, cut block, tool for the alloy cutting tools, nearly 9-11 tons per day, cutting tools are not sharp and repeated grinding

Model

Motor power

Capacity

Size of discharge

Size of equipment

Weight of equipment

GLQK-1

7.5kw

0.8-1.5t/h

35*35*35

780*550*1210

0.6ton

Tyre crushing machine
Waste Rubber equipment consist of the decomposition of waste tire facilities, mill group, screening magnetic powder delivery unit.Through the tyre bead ring cutting off machine, tyre strips cutting machine and the tyre rim cutting machine , first tyre processed into 3.5 cm square pieces; then type on the rubber mill group GLKP400/450/560 blocks havebroken ground wire mixed powder, then powder Magnetic conveyor type unit screening will be completely separate wire and tire rubber. By belt conveyor through two sieve bedsfilter out the fine material via magnetic roller, magnetic separation of the wire, the system of 10-degree head -40 mesh fine powder purity (fineness optional). Below standardmesh fineness of powder materials by conveyor to return block grinding mill again, this cycle of advanced grinding technology, without any chemicals, no gas, no water, lowoperating costs. Magnetic effect of 99.9% of steel wire to GLKP450 type, for example, the total installed power 80KW, 1 ton per tire processing power around 200 degrees, output200-400 kg per hour (to obtain powder of different fineness, yield also different), is the use of steel wire tire rubber powder produced the best equipment.

Model

Roller diameter×

length

mm

Roll ratio

Front roll speed
M/min

capacity
Kg/h

Max distance of roll mm

Motor

KW

Dimension (mm)

Weight  Kg

GLKP-400

400×600

1:1.38

17.16

70~600

10

45

4210×1850×1925

7500

GLKP-450

450×760

1:1.38

23.43

1000

10

55

4550×1970×1860

11000

GLKP-560

510×800
560×800

1:1.39

27.14

2000

15

75

5620×2260×1900

16000

Host (broken plastic machine) for the whole facility: mainly used for rubber block grinding milling, the machine rolls of chilled cast iron, hard wear-resistant surface, rollafter roll for the groove, cavity processing, so that the roll surface temperature uniform; with overload protection and emergency braking device, safe and reliable; with handwheel adjustment roller spacing, easy to operate, output per hour production of 200-400KG.This machine has one base, frame, front and rear roller, transmission gear, gear box, adjust the device, roller temperature control devices, safety switches and electricalcontrol systems and other components.
Roller material alloy chilled cast iron (the implementation of national HG/T3108-1998 roll standards), with high hardness and wear resistance, roller temperature control deviceaccess to the roller cylinder to adjust the roller cooling water temperature to meet the process requirements

Contact: Cathy

Mobile: 0086-13939083413

Tel; 0086-371-60317344

Fax: 0086-371-60317344

Email: cathy@gsl-machine.com

Skype: gashili001

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service